All Send-Init fields are optional. The data field may be left totally empty.
Similarly, intervening fields may be defaulted by setting them to blank. Ker-
mit implementations should know what to do in these cases, namely apply ap-
propriate defaults. The defaults should be:
MAXL: 80
TIME: 5 seconds
NPAD: 0, no padding
PADC: 0 (NUL)
EOL: CR (carriage return)
QCTL: the character "#"
QBIN: space, can't do 8-bit quoting
CHKT: "1", single-character checksum
REPT: No repeat count processing
CAPAS: All zeros (no special capabilities)
WINDO: Blank (zero) - no sliding windows
MAXLX1: Blank (zero) - no extended length packets
MAXLX2: Blank (zero) - no extended length packets
-----
If the receiver responds favorably to an extended-length packet bid (that is,
if its ACK has the LONGP bit set in the CAPAS field), then the combined value
of its MAXLX1,MAXLX2 fields is used. If the LONGP bit is set but the
MAXLX1,MAXLX2 pair is missing, then the value 500 will be used by default.
Tera Term
kv->KmtYour の初期化のために kv->KmtMy をコピーしている。
Initalize で省略された場合はプロトコルとしてのデフォルトが使われるべきだと思う。 cf. kproto.txt
All Send-Init fields are optional. The data field may be left totally empty. Similarly, intervening fields may be defaulted by setting them to blank. Ker- mit implementations should know what to do in these cases, namely apply ap- propriate defaults. The defaults should be: MAXL: 80 TIME: 5 seconds NPAD: 0, no padding PADC: 0 (NUL) EOL: CR (carriage return) QCTL: the character "#" QBIN: space, can't do 8-bit quoting CHKT: "1", single-character checksum REPT: No repeat count processing CAPAS: All zeros (no special capabilities) WINDO: Blank (zero) - no sliding windows MAXLX1: Blank (zero) - no extended length packets MAXLX2: Blank (zero) - no extended length packets ----- If the receiver responds favorably to an extended-length packet bid (that is, if its ACK has the LONGP bit set in the CAPAS field), then the combined value of its MAXLX1,MAXLX2 fields is used. If the LONGP bit is set but the MAXLX1,MAXLX2 pair is missing, then the value 500 will be used by default.このせいで問題が起きているという報告は今のところない。バグといえるか微妙なので Reminds にしておく。