酒井 聡司
ssaka****@opend*****
2013年 10月 3日 (木) 18:05:17 JST
山内様、松島様 返信ありがとうございます。 返信が遅くなりました。動くようになりました。 > Sep 18 18:44:34 nginx2 lrmd: [2273]: info: RA output: (r-nginx:start:stderr) /usr/lib/ocf/resource.d//heartbeat/nginx: line 403: [: too many arguments の該当行から判断してPidFileが取得できていなかったため、 nginxのインストールで--pid-path= をつけてやってみたらうまくいきました。 はまっていたのでアドバイス助かりました。 RAがおかしいのかと色々見ていたのも勉強になりました。ありがとうございました。 On Fri, 20 Sep 2013 21:21:18 +0900 Takehiro Matsushima <takeh****@gmail*****> wrote: > 酒井さん > > こんにちは、松島と申します。 > スマホで書いていますので短文にて失礼致します。 > > nginxの設定ファイルをパラメタに書かれていますが、その設定ファイルを使用しての単品起動（クラスタの管理外として）は出来ますでしょうか。 > nginxそのもののLogも重要な情報源となると思います。 > 気になったのはmime.typeにアクセスできないですとか、そういった類のエラーが出ている事です。 > > 失礼致しました。 > 2013/09/19 17:16 "酒井 聡司" <ssaka****@opend*****>: > > > 酒井と申します。 > > pacemaker,hearbeat,nginxで設定がうまくいきません。原因についてどなたかご教授ください。 > > > > ・環境 > > HW :VMware上の仮想サーバ > > OS :CentOS6.4 > > Pacemaker:1.0.13-1.1 > > Heartbeat:3.0.5 > > niginx :1.4.2 > > > > > > 行ったことは以下です。 > > ・Nginxのインストール > > ・Pacemakerのインストール > > tar zxvf pacemaker-1.0.13-1.1.el6.x86_64.repo.tar.gz -C /tmp > > yum -c /tmp/pacemaker-1.0.13-1.1.el6.x86_64.repo/pacemaker.repo install > > pacemaker-1.0.13 heartbeat-3.0.5 pm_extras-1.3 > > > > ha.cf > > =============================================================== > > pacemaker on > > logfacility local1 > > > > debug 0 > > udpport 694 > > > > keepalive 2 > > warntime 20 > > deadtime 24 > > initdead 48 > > > > bcast eth1 > > > > node nginx1 > > node nginx2 > > watchdog /dev/watchdog > > =============================================================== > > > > authkeys > > =============================================================== > > auth 1 > > 1 sha1 abcdefg > > =============================================================== > > chmod 600 authkeys > > > > /etc/init.d/heartbeat start > > > > リソースの追加 > > crm configure property no-quorum-policy="ignore" stonith-enabled="false" > > crm configure rsc_defaults resource-stickiness="INFINITY" > > migration-threshold="1" > > crm configure primitive r-nginx ocf:heartbeat:nginx params > > configfile="/usr/local/nginx/conf/nginx.conf" op start interval="0" > > timeout="40" op stop interval="0" timeout="60" > > > > ここまで行った時点で、crm_monでは以下のように表示されてしまいます。 > > ============ > > Stack: Heartbeat > > Current DC: nginx2 (f972658e-c709-4bb3-b2b9-1c354b6722c4) - partition with > > quorum > > Version: 1.0.13-30bb726 > > 2 Nodes configured, unknown expected votes > > 1 Resources configured. > > ============ > > > > Online: [ nginx2 ] > > OFFLINE: [ nginx1 ] > > > > > > Failed actions: > > r-nginx_start_0 (node=nginx2, call=3, rc=-2, status=Timed Out): > > unknown exec error > > > > > > ログには次のように記録されています。 > > > > 〜抜出〜 > > Sep 18 18:44:33 nginx2 lrmd: [2273]: info: rsc:r-nginx start[3] (pid 2458) > > Sep 18 18:44:33 nginx2 lrmd: [2273]: info: RA output: > > (r-nginx:start:stderr) ls: > > Sep 18 18:44:33 nginx2 lrmd: [2273]: info: RA output: > > (r-nginx:start:stderr) cannot access mime.types > > Sep 18 18:44:33 nginx2 lrmd: [2273]: info: RA output: > > (r-nginx:start:stderr) : No such file or directory > > Sep 18 18:44:33 nginx2 lrmd: [2273]: info: RA output: > > (r-nginx:start:stderr) > > Sep 18 18:44:33 nginx2 lrmd: [2273]: info: RA output: > > (r-nginx:start:stderr) ls: > > Sep 18 18:44:33 nginx2 lrmd: [2273]: info: RA output: > > (r-nginx:start:stderr) cannot access mime.types > > Sep 18 18:44:33 nginx2 lrmd: [2273]: info: RA output: > > (r-nginx:start:stderr) : No such file or directory > > Sep 18 18:44:33 nginx2 lrmd: [2273]: info: RA output: > > (r-nginx:start:stderr) > > Sep 18 18:44:33 nginx2 lrmd: [2273]: info: RA output: > > (r-nginx:start:stderr) /usr/lib/ocf/resource.d//heartbeat/nginx: line 403: > > [: too many arguments > > Sep 18 18:44:34 nginx2 nginx(r-nginx)[2458]: INFO: nginx: the > > configuration file /usr/local/nginx/conf/nginx.conf syntax is ok nginx: > > configuration file /usr/local/nginx/conf/nginx.conf test is successful > > Sep 18 18:44:34 nginx2 nginx(r-nginx)[2458]: INFO: Starting > > /usr/local/nginx/sbin/nginx - nginx version: nginx/1.4.2 > > Sep 18 18:44:34 nginx2 nginx(r-nginx)[2458]: INFO: > > /usr/local/nginx/sbin/nginx build configuration: configure arguments: > > --user=nginx --group=nginx --with-http_ssl_module --with-http_realip_module > > --with-http_addition_module --with-http_xslt_module > > --with-http_image_filter_module --with-http_geoip_module > > --with-http_sub_module --with-http_dav_module --with-http_flv_module > > --with-http_gzip_static_module --with-http_random_index_module > > --with-http_secure_link_module --with-http_stub_status_module > > Sep 18 18:44:34 nginx2 lrmd: [2273]: info: RA output: > > (r-nginx:start:stderr) /usr/lib/ocf/resource.d//heartbeat/nginx: line 403: > > [: too many arguments > > Sep 18 18:44:34 nginx2 nginx(r-nginx)[2458]: INFO: nginx not running > > Sep 18 18:44:34 nginx2 nginx(r-nginx)[2458]: INFO: Waiting for > > /usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf to come up > > (try 1) > > Sep 18 18:44:35 nginx2 lrmd: [2273]: info: RA output: > > (r-nginx:start:stderr) /usr/lib/ocf/resource.d//heartbeat/nginx: line 403: > > [: too many arguments > > Sep 18 18:44:35 nginx2 nginx(r-nginx)[2458]: INFO: nginx not running > > Sep 18 18:44:35 nginx2 nginx(r-nginx)[2458]: INFO: Waiting for > > /usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf to come up > > (try 2) > > Sep 18 18:44:36 nginx2 lrmd: [2273]: info: RA output: > > (r-nginx:start:stderr) /usr/lib/ocf/resource.d//heartbeat/nginx: line 403: > > [: too many arguments > > (snip) > > Sep 18 18:45:13 nginx2 lrmd: [2273]: info: RA output: > > (r-nginx:start:stderr) /usr/lib/ocf/resource.d//heartbeat/nginx: line 403: > > [: too many arguments > > Sep 18 18:45:13 nginx2 nginx(r-nginx)[2458]: INFO: nginx not running > > Sep 18 18:45:13 nginx2 nginx(r-nginx)[2458]: INFO: Waiting for > > /usr/local/nginx/sbin/nginx -c /usr/local/nginx/conf/nginx.conf to come up > > (try 40) > > Sep 18 18:45:13 nginx2 lrmd: [2273]: WARN: r-nginx:start process (PID > > 2458) timed out (try 1). Killing with signal SIGTERM (15). > > Sep 18 18:45:13 nginx2 lrmd: [2273]: WARN: operation start[3] on r-nginx > > for client 2276: pid 2458 timed out > > Sep 18 18:45:13 nginx2 crmd: [2276]: ERROR: process_lrm_event: LRM > > operation r-nginx_start_0 (3) Timed Out (timeout=40000ms) > > Sep 18 18:45:13 nginx2 crmd: [2276]: WARN: status_from_rc: Action 5 > > (r-nginx_start_0) on nginx2 failed (target: 0 vs. rc: -2): Error > > Sep 18 18:45:14 nginx2 crmd: [2276]: WARN: update_failcount: Updating > > failcount for r-nginx on nginx2 after failed start: rc=-2 (update=INFINITY, > > time=1379497514) > > Sep 18 18:45:14 nginx2 crmd: [2276]: info: abort_transition_graph: > > match_graph_event:299 - Triggered transition abort (complete=0, > > tag=lrm_rsc_op, id=r-nginx_start_0, > > magic=2:-2;5:3:0:c339c71a-c03d-4d27-9134-ff9ea830bed3, cib=0.12.5) : Event > > failed > > Sep 18 18:45:14 nginx2 crmd: [2276]: info: update_abort_priority: Abort > > priority upgraded from 0 to 1 > > Sep 18 18:45:14 nginx2 crmd: [2276]: info: update_abort_priority: Abort > > action done superceeded by restart > > Sep 18 18:45:14 nginx2 crmd: [2276]: info: match_graph_event: Action > > r-nginx_start_0 (5) confirmed on nginx2 (rc=4) > > Sep 18 18:45:14 nginx2 crmd: [2276]: info: run_graph: > > ==================================================== > > Sep 18 18:45:14 nginx2 crmd: [2276]: notice: run_graph: Transition 3 > > (Complete=4, Pending=0, Fired=0, Skipped=0, Incomplete=0, > > Source=/var/lib/pengine/pe-input-56.bz2): Complete > > Sep 18 18:45:14 nginx2 crmd: [2276]: info: te_graph_trigger: Transition 3 > > is now complete > > Sep 18 18:45:14 nginx2 crmd: [2276]: info: do_state_transition: State > > transition S_TRANSITION_ENGINE -> S_POLICY_ENGINE [ input=I_PE_CALC > > cause=C_FSA_INTERNAL origin=notify_crmd ] > > Sep 18 18:45:14 nginx2 crmd: [2276]: info: do_state_transition: All 1 > > cluster nodes are eligible to run resources. > > Sep 18 18:45:14 nginx2 attrd: [2275]: info: find_hash_entry: Creating hash > > entry for fail-count-r-nginx > > Sep 18 18:45:14 nginx2 attrd: [2275]: info: attrd_trigger_update: Sending > > flush op to all hosts for: fail-count-r-nginx (INFINITY) > > Sep 18 18:45:14 nginx2 crmd: [2276]: info: do_pe_invoke: Query 85: > > Requesting the current CIB: S_POLICY_ENGINE > > Sep 18 18:45:14 nginx2 crmd: [2276]: info: do_pe_invoke_callback: Invoking > > the PE: query=85, ref=pe_calc-dc-1379497514-30, seq=1, quorate=1 > > Sep 18 18:45:14 nginx2 attrd: [2275]: info: attrd_perform_update: Sent > > update 19: fail-count-r-nginx=INFINITY > > Sep 18 18:45:14 nginx2 attrd: [2275]: info: find_hash_entry: Creating hash > > entry for last-failure-r-nginx > > Sep 18 18:45:14 nginx2 attrd: [2275]: info: attrd_trigger_update: Sending > > flush op to all hosts for: last-failure-r-nginx (1379497514) > > Sep 18 18:45:14 nginx2 pengine: [2278]: notice: unpack_config: On loss of > > CCM Quorum: Ignore > > Sep 18 18:45:14 nginx2 pengine: [2278]: info: unpack_config: Node scores: > > 'red' = -INFINITY, 'yellow' = 0, 'green' = 0 > > Sep 18 18:45:14 nginx2 pengine: [2278]: info: determine_online_status: > > Node nginx2 is online > > Sep 18 18:45:14 nginx2 pengine: [2278]: WARN: unpack_rsc_op: Processing > > failed op r-nginx_start_0 on nginx2: unknown exec error (-2) > > Sep 18 18:45:14 nginx2 pengine: [2278]: notice: native_print: > > r-nginx#011(ocf::heartbeat:nginx):#011Started nginx2 FAILED > > Sep 18 18:45:14 nginx2 pengine: [2278]: notice: LogActions: Recover > > resource r-nginx#011(Started nginx2) > > Sep 18 18:45:14 nginx2 attrd: [2275]: info: attrd_perform_update: Sent > > update 22: last-failure-r-nginx=1379497514 > > Sep 18 18:45:14 nginx2 crmd: [2276]: info: abort_transition_graph: > > te_update_diff:150 - Triggered transition abort (complete=1, tag=nvpair, > > id=status-f972658e-c709-4bb3-b2b9-1c354b6722c4-fail-count-r-nginx, > > name=fail-count-r-nginx, value=INFINITY, magic=NA, cib=0.12.6) : Transient > > attribute: update > > Sep 18 18:45:14 nginx2 crmd: [2276]: info: abort_transition_graph: > > te_update_diff:150 - Triggered transition abort (complete=1, tag=nvpair, > > id=status-f972658e-c709-4bb3-b2b9-1c354b6722c4-last-failure-r-nginx, > > name=last-failure-r-nginx, value=1379497514, magic=NA, cib=0.12.7) : > > Transient attribute: update > > Sep 18 18:45:14 nginx2 crmd: [2276]: info: handle_response: pe_calc > > calculation pe_calc-dc-1379497514-30 is obsolete > > Sep 18 18:45:14 nginx2 crmd: [2276]: info: do_pe_invoke: Query 86: > > Requesting the current CIB: S_POLICY_ENGINE > > Sep 18 18:45:14 nginx2 crmd: [2276]: info: do_pe_invoke: Query 87: > > Requesting the current CIB: S_POLICY_ENGINE > > Sep 18 18:45:14 nginx2 pengine: [2278]: info: process_pe_message: > > Transition 4: PEngine Input stored in: /var/lib/pengine/pe-input-57.bz2 > > Sep 18 18:45:14 nginx2 crmd: [2276]: info: do_pe_invoke_callback: Invoking > > the PE: query=87, ref=pe_calc-dc-1379497514-31, seq=1, quorate=1 > > Sep 18 18:45:14 nginx2 pengine: [2278]: notice: unpack_config: On loss of > > CCM Quorum: Ignore > > Sep 18 18:45:14 nginx2 pengine: [2278]: info: unpack_config: Node scores: > > 'red' = -INFINITY, 'yellow' = 0, 'green' = 0 > > Sep 18 18:45:14 nginx2 pengine: [2278]: info: determine_online_status: > > Node nginx2 is online > > Sep 18 18:45:14 nginx2 pengine: [2278]: WARN: unpack_rsc_op: Processing > > failed op r-nginx_start_0 on nginx2: unknown exec error (-2) > > Sep 18 18:45:14 nginx2 pengine: [2278]: notice: native_print: > > r-nginx#011(ocf::heartbeat:nginx):#011Started nginx2 FAILED > > Sep 18 18:45:14 nginx2 pengine: [2278]: info: get_failcount: r-nginx has > > failed INFINITY times on nginx2 > > Sep 18 18:45:14 nginx2 pengine: [2278]: WARN: common_apply_stickiness: > > Forcing r-nginx away from nginx2 after 1000000 failures (max=1) > > 〜〜 > > > > どのようなことが原因として考えられるのでしょうか？ > > > > _______________________________________________ > > Linux-ha-japan mailing list > > Linux****@lists***** > > http://lists.sourceforge.jp/mailman/listinfo/linux-ha-japan > >
Fork