Downloadliste

Projektbeschreibung

Argyll is an ICC compatible color management system. It supports accurate ICC profile creation for scanners, CMYK printers, and film recorders, and calibration and profiling of displays. Spectral sample data is supported, allowing a selection of illuminants observer types, and paper fluorescent whitener additive compensation. Profiles can also incorporate source specific gamut mappings for perceptual and saturation intents. Gamut mapping and profile linking uses the CIECAM02 appearance model, a unique gamut mapping algorithm, and a wide selection of rendering intents. It also includes code for a fast 8-bit raster color conversion engine as well as support for fast, fully accurate 16-bit conversion. Device color gamuts can also be viewed and compared using a VRML viewer.

Systemanforderungen

Die Systemvoraussetzungen sind nicht definiert
Information regarding Project Releases and Project Resources. Note that the information here is a quote from Freecode.com page, and the downloads themselves may not be hosted on OSDN.

2012-03-20 06:28
1.3.6

Diese Veröffentlichung fügt Unterstützung Spyder4. Experimentelle ColorHug-Unterstützung einkompiliert ist, aber ist nur aktiviert, wenn die Variable "ENABLE_COLORHUG" gesetzt ist. Die Display-Auswahl (-y Flagge) wurde geändert und erweitert, um die gerätespezifischen zur Unterstützung von Spyder4 und ColorHug werden. Diese Version i1d3 Integration Mal zwickt und genaue Aktualisierung Zeitraum Kalibrierung der Display-Aktualisierungsmodus hinzugefügt. Es ändert die i1disp Messung Logik zu versuchen und es robuster gegen Licht zu dunklen Änderungen während einer Lesung.
This release adds Spyder4 support. Experimental ColorHug support is compiled in, but is disabled unless the environment variable "ENABLE_COLORHUG" is set. The display selection (-y flag) has been changed and expanded to be instrument-specific to support Spyder4 and ColorHug. This release tweaks i1d3 integration times and adds accurate refresh period calibration to the refresh display mode. It changes i1disp measurement logic to try and make it more robust against light to dark changes during a reading.

2011-10-25 12:29
1.3.5

Unterstützung für X-Rite i1 Display Pro und ColorMunki Display Farbmessgeräten (i1d3), und zahlreiche Tweaks, Verbesserungen und Bugfixes.
Support for X-Rite i1 Display Pro and ColorMunki Display colorimeters (i1d3), and numerous tweaks, improvements, and bugfixes.

2011-05-16 21:12
1.3.3

Zahlreiche kleinere Bugfixes und Funktionserweiterungen vorgenommen wurden. Ein Wahrnehmungs-und Sättigung Rendering (CIECAM02) Problem, dass ein weißer Punkt Mismatch und armen blauen Farbton verursacht wurde behoben.
Numerous minor bug fixes and feature enhancements were made. A perceptual and saturation rendering (CIECAM02) problem that caused a white point mismatch and poor blue hue was fixed.

2010-09-09 20:50
1.3.0

Ein neues Dienstprogramm ccmxmake wurde hinzugefügt, um Colorimeter Korrektur Matrizen machen (. CCMX) für eine bestimmte Kombination Colorimeter + Display, welches dann mit spotread, dispcal und dispread verwendet werden kann. Eine neue dispcal und dispread Option, die zum Instrument schwarz Drift entgegenzuwirken und Display weiß Drift Versuche aufgenommen. Mehrere Fehler wurden behoben, darunter Probleme mit dem Eye-One Pro und ColorMunki Treiber.
A new ccmxmake utility was added to make Colorimeter Correction Matrices (.ccmx) for a particular Colorimeter + Display combination, which can then be used with spotread, dispcal, and dispread. A new dispcal and dispread option that attempts to counteract instrument black drift and display white drift was added. Several bugs were fixed, including problems with the Eye-One Pro and ColorMunki drivers.

2010-07-30 17:20
1.2.0

Gamut Mapping wurde verbessert. MS Windows 64-Bit-USB-Treiber-Unterstützung wurde hinzugefügt. Das Tool wurde für illumread Lesung Leuchtmittel UV für verbesserte FWA (OBA) Entschädigung hat. Kleinere Bugfixes und Verbesserungen durchgeführt wurden.
Gamut mapping was improved. MS Windows 64-bit USB driver support was added. The illumread tool was added for reading illuminant U.V. for improved FWA (OBA) compensation. Minor bug fixes and improvements were done.

Project Resources