• R/O
  • SSH

Scope: Liste der Commits

digital oscilloscope


RSS
Rev. Zeit Autor
e778ca7ec17b tip 2018-12-03 04:14:20 PJ

firmware/bulk/setupdat: handle_get_interface() changed; handle_hispeed() removed

9ec289b9b4fe 2018-11-24 23:06:30 PJ

ep3/cy_max_test: rd DATA timing relative to SLOE

0e3db1460a3a 2018-11-24 19:29:24 PJ

ep3/cy_max_test.sdc: sloe/din rel to clk

ad164e61b60f 2018-11-23 23:22:52 PJ_WORK

ep3/cy_max_test.sdc: SLOE rel to IFCLK

f59d81af1ec8 2018-11-23 20:30:57 PJ_WORK

ep3/cy_max_test: capture DATA in on falling edge

6ae688c6805a 2018-11-23 05:41:00 PJ

ep3/cy_max_test: DATA out ok

a03dc92c6cfb 2018-11-23 05:14:23 PJ

ep3/cy_max_test: SLRD/WR ok

9fe2d3fc7988 2018-11-23 04:36:22 PJ

ep3/cy_max_test: IFCLK=CLK/2

5d95eb57c0c7 2018-11-22 06:20:42 PJ

ep3/cy_max_test: sloe -> din ok

29cedb0d9ee0 2018-11-22 04:42:16 PJ

ep3/cy_max_test: compiled

0826fcbbd905 2018-11-22 03:59:49 PJ

ep3/cy_max_test: Cy FIFO max throughput test, using EEG32 PCB

68aa0f8389d9 2018-11-21 23:59:13 PJ_WORK

fpga/cy.json

45a8c7d3c145 2018-11-20 23:51:01 PJ_WORK

fpga/cy.json: Cypress Slave FIFO timing

19d1fb46a851 2018-11-20 22:15:21 PJ_WORK

gui/probe_run_iso_*: aligned with probe_run_bulk_d.h - no change expected

6e2bcb3b8b6a 2018-10-29 20:19:57 PJ_WORK

cy_fifo_timing.txt

8f5581ebe1c6 2018-10-19 18:11:53 PJ_WORK

fpga/cy_fifo.txt: Slave FIFO spec

104b40fb884d 2018-09-20 01:45:08 PJ

gui: max shrink increased

0f1b6d3e03aa 2018-09-19 18:32:17 PJ_WORK

cli/RingBuf.h: allocate all buffers at once; gui: remove Ain storage if D_ONLY

d2fb2cb0f634 2018-09-19 04:35:28 PJ

gui/probe_run_bulk_d.h: chunk number corrected for Bulk

351bfa4f644b 2018-09-19 03:57:49 PJ

gui/probe_run_bulk_d.h: sample number aligned

36a5ebac1261 2018-09-18 23:43:49 PJ_WORK

gui/probe_run_bulk_d.h: timeout value corrected

a53fa22eab01 2018-09-18 22:17:19 PJ_WORK

gui: compilation warnings cleared

10697a19f8f1 2018-09-18 18:49:10 PJ_WORK

cli/RingBuf.h; gui/probe_run_bulk_d.h

e7af8ef2eb2e 2018-09-18 05:55:03 PJ

gui/probe_run.h: TEST_MAXSIZE; gui/scope.cc: new sampling freq; cli/DX_read.h: use correct timeout

aa8a34d7dde4 2018-09-18 02:41:40 PJ

gui: clear "warning: dereferencing type-punned pointer"

41248e93aa05 2018-09-17 23:26:45 PJ_WORK

cli/iso_ringbuf.h: support Bulk transfer

2d887527abb7 2018-09-17 22:35:39 PJ_WORK

gui/probe_run.h: dx_status() pref changed to char

c70e4f7119c6 2018-09-17 04:05:45 PJ

cli/speed_bulk.cc: updated

60856c919866 2018-09-17 02:41:08 PJ

firmware/bulk/other.h: asm optimisation; firmware/.../Makefile: aligned

2df2b5e9776d 2018-09-16 22:33:16 PJ

cli/test_in.cc: long async transfer

Show on old repository browser